CATEGORIES

• Test Probe,Test Finger,Test Pin
• Plug and Receptacles Gauge
• Lamp Caps Gauge
• Flammability Testing Instrument
• Spring Hammer Test Equipment
• Ingress Protection Tester
• Electrical Safety Test Equipment
• Safety Testing Electrical Device
• Lampholders Gauge
• LED Lamps Tester
• Withstand Voltage Tester
• Irradiance Meter
• Weighing Sensor
• Instrument Accessories
• Other Test Equipment

Latest news

• What is BS EN ISO 20340:2014 ?
• What is ISO 30266:2013 ?
• What is BS EN ISO 7530-2:2021 ?
• What is ISO 12100:2016 ?
• What is ISO NP 23838 ?
• What is the relationship between CP an

Contact us

• ADD: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
• TEL: +86-755-33168386
• FAX: +86-755-61605199
• E-mail: sales@china-gauges.com

  > Products

• 

  500g Test Package of EN

  Food simulant used as load when testing frozen food compartmen...

• 

  EN 60360 Figure 3 - E14/

  According to standard EN 60360 / IEC 60360 figures 3, used to ...

• 

  Abrasion Resistance Test

  Abrasion Resistance Tester according to IEC 60950 figure 2K an...

• 

  IEC 60238 Figure 5 Torqu

  IEC 60238 Figure 5 Torque Test Caps of E14. According to st...

• 

  AS/NZS 3112 Figure B1 Ga

  AS/NZS 3112 Figure B1 Gauge for Two-Pin Flat-Pin 125 V Max. Pl...

• 

  BS 1363-1 Figure 32 Test

  BS 1363-1 Figure 32 Test Apparatus for Tests on Plug Pins. ...

• 

  UL 1310 Figure 16.1 Test

  UL 1310 Figure 16.1 Test Pin. According to standard UL 131...

• 

  UL 921 Figure 3 Probe fo

  According to standard UL 921 Fig. 3....

• 

  NF C 61-314 C7 CALIBRES

  According to standard NF C 61-314 C7....

• 

  NF C 61-314 Figure 35 Ca

  According to standard NF C 61-314 Fig. 35....

• 

  IEC60068-2-75 Figure A.6

  IEC60068-2-75 Figure A.6 50J Vertical Hammers for Test Ehc Str...

• 

  EN 50075 Figure 3 Standa

  According to standard EN 50075 Fig. 3....

• 

  CEI 23-50 Fig. 5 Calibro

  According to standard CEI 23-50 Figure 5....

• 

  CEI 23-50 Fig. 2 Dito Di

  According to standard CEI 23-50 Figure 2....

• 

  IEC 60238 Figure 14 + Ta

  IEC 60238 Figure 14 + Table 9 Test Cap for Lampholders E27. ...

• 

  EN 60350-2:2013 Standard

  one set with 8 pcs, the diameter is: 120 mm, 150mm, 180mm, 210...

• 

  EP10 Go Gauge for Caps o

  EP10 Go Gauge for Caps on Finished Lamps 7006-37-1. Accordin...

• 

  B15d Gauges for The Slot

  B15d Gauges for The Slots in Lampholders 7006-13-5. Accordi...